AVF Inserts
best Inserts in Vietnam
Press-In
Inserts
Our Threaded Inserts can be order in Metric and Inch . We supply all kinds of Inserts with variety length for the industry.
Press-in insertion is the most economical option when it comes to inserts because it only requires a standard press machine to press the inserts into pre-formed holes, eliminating the need for other expensive auxiliary equipment. Since this method only requires a simple step, the torque and pull-out resistance would not be as strong as the aforementioned methods. When the screw comes into contact with the insert, the sides of the insert protrude out into the wall of the plastic, securing the insert in its mold.
Press-In Expansion Inserts Type A
The diamond knurls provide torque loads and tensile resistance whereas the overall design helps secure the insert in place when the threads are fully engaged.
Press-In Hexagonal Inserts
Unlike other inserts, the hexagonal insert has “barbed” design which can be used in applications where high pull-out and torque-out resistance are required.
Press-In Thru-Treaded Inserts Design B
Most commonly used in thermoset plastic. The pilot end acts as a guide during insertion process and the helical knurls on the side help secure the insert in place.
Press-In Expansion Inserts Type B
The diamond knurls provide torque loads and tensile resistance whereas the overall design helps secure the insert in place when the threads are fully engaged.
Press-In Straight Knurl Inserts
The straight knurl provides better torsional resistance whereas the slotted design allows the insert to be pressed in easier due to its compression ability.
Press-In Thru-Treaded Inserts Design C
Most commonly used in thermoset plastic. The pilot end acts as a guide during insertion process and the helical knurls on the side help secure the insert in place.
Press-In Flange Head Inserts
Can be pressed in along with reusable threads. The flange head design separate the mating screw from the plastic and sits right above the hole, providing easier installation.
Press-In Thru-Treaded Inserts Design A
Most commonly used in thermoset plastic. The pilot end acts as a guide during insertion process and the helical knurls on the side help secure the insert in place.
ABOUT US
AVF Inserts
subsidiary of VF Decolletage Co, Ltd.
Lot 11 Zone A1 Tan Thoi Hiep Ind Zone, W. Hiep Thanh D.12, HCMC, Vietnam.
Web: www.avfinserts.com - www.avfinserts.vn
Email: sales@avfinserts.com
Tel: +84.283.717.5001
Fax: +84.283.717.5278
AVF Decolletage
5754 Old Clifton Rd,
Clifton VA 20124, U.S.A.
Email: info@avfdecolletage.com
Tel: +1.571.393.3099
PRODUCTS
All Rights Reserved © 2020 | AVF Inserts